Major Metal Fabrication and Supply

[Guest]

I recently picked up a Torchmate CNC Table and I have started a small part-time business offering up these services to others. I can cut anything from a small tab or bracket for your rig to wall art for your man cave. I can also supply steel for your projects. Let me know what I can help you with by private message or email me at majormetal@hotmail.com

[JEEPINKC]

Sweet. Congrats!
Hope it works out well for you. Will be in touch when the need arises.

[jagular7]

Cool. Thanks.

[Guest]

awesome to hear. and thanks!

[spunebil]

I assume this is plasma :)

I have a design for front handrail ( aluminum)

Its nautical and Sexy gals will also be included

Can ya handle that?

If not, I can do it by hand

( as originaly planned) ;)

[Guest]

I assume this is plasma :)

I have a design for front handrail ( aluminum)

Its nautical and Sexy gals will also be included

Can ya handle that?

If not, I can do it by hand

( as originaly planned) ;)

Yes on plasma.

I'm up for anything Spune

What size is the piece? The table cuts a tad over 2'x4' Email me some specs and a rough idea of the design and if it'll fit I'd be glad to take a look.

[spunebil]

Shucks ....now i need to streatch a tape :)

I am thinking its less than 3' x 2' ;)

And I have some STUCK UP IDIOTS ACROSS THE STREET! LOL

MIGHT BE better to hand deliver ( dont want to crash folks puter if its too racey! ;) )

[JeepN4kc]

That sounds great. Good luck with the start-up! Do you have a brake press as well? I may be interested in a custom skid in the future.
Thanks for sharing. :mrgreen:

[rjh]

We broke mine with a cutoff wheel and a stick welder. Left a couple "tabs" and used a crescent wrench and cheater pipe to make the bends in the 1/4", then welded everything back up.

[Guest]

Here's a few things I've been working on lately for some friends and family.

Some plates for a friend. .080" aluminum roughly 7" wide.





Here's a Jayhawk I'm working on for my brothers newly finished basement den slash game room. Going to be polished .080" aluminum 24"x24"

[Guest]

That sounds great. Good luck with the start-up! Do you have a brake press as well? I may be interested in a custom skid in the future.
Thanks for sharing. :mrgreen:

Thanks. I do have a press brake, but it's a small home made deal I made for my 12t harbor freight. It has a max width of 16". I've had some pretty good luck bending 3/16" for some tube fenders by hand. It's a good way to work out those day to day issues ;)

[Guest]

How about a 1/4" lower link tab? Fresh off the table ready to go on, no clean-up necessary!

[Guest]

That is awesome!!! I think you can do well with this.

I don't have a need right now, but I'm sure I will eventually!

[Guest]

Couple projects I worked on Friday

Little tool box that clips on the side of my water table







And a bracket I whipped up to mount the fuel pump on my 50gal aux tank for the diesel

[spunebil]

Is that logo a leaf?
And if so,
an oak?