Tweet
I replaced the pcv. pulled the pcv hose thats connected to the tbi and the rpms shot up to 4-5 k rpms at idle. Used a center punch and made a rubber grommet last night at work and put it on today. No oil fill leaks now its coming out of the rear hole on the VC. It had a breather but i took it off and misplaced it and have been running an open hole. Which now is the point of exit for the oil. If i remember correctly there is supposed to be a line ciming from the original carb that goes to that hole. So in point im either going to plug it off completely or run a breather again.
Comment