Announcement

Collapse
No announcement yet.

Trade suspension...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trade suspension...

    So Im looking to make the mall crawler a little more street friendly. Id like to trade my suspension, axles, wheels and tires for a different setup. Id like the following:

    Long arm suspension
    D30 front (geared for 33"-35")
    D44 or 8.8 rear (geared for 33"-35")(might consider a D35 and some $$)
    MT tires 33" to 35"
    rear driveshaft made from 1/4" DOM
    Stock gas tank for a 00 TJ.

    Here's what I have to trade

    Dana 44 Front axle
    -5.38 gears
    -spool
    -CTM's
    -Warn Lockouts
    -Alloy USA Inner and Outer Shafts
    -5x5.5 bolt pattern
    Dana 44 Rear Axle
    -5.38 gears
    -spool
    -Alloy USA Shafts
    -5x5.5 bolt pattern
    Rock Krawler streatch Kit with ~6" of lift
    -Wheel base streatch ~10"
    Fuel Cell behind the rear seat. Rear seat is still fully functional.
    -Uses a KORE fuel pump mounting ring with stock pump.
    38" Super Swamper TSL's

    My setup is in the Jeep and you can drive it before the trade. Your setup most be from a running Jeep as well.
    My loss is your gain...

    pics and 4 Sale thread are here
    http://www.kcjeepclub.org/forum/show...p?3882-2000-tj
Working...
X