Help with rear axle teardown

[Guest]

Hey guys. I'm cleaning up the 14 bolt I picked up but need some help. Anyone have a plasma cutter that wants to help me get these old leaf perches off nice and easy? And does anyone have suggestions on a good place for sand blasting the axle?

[reward_1000]

I have access to a plasma if you can bring it to the shop and we just had an axle blasted down in the bottoms some where, it was fairly cheap and quick I will get the name for you.

[reward_1000]

The name of the place is Industrial Services and they are on Woodsweather Rd.

[spunebil]

I have plasma , but a torch works just as well :)


And a good sand blaster is on raytown rd. and around 57th?

[Guest]

I have access to a plasma if you can bring it to the shop and we just had an axle blasted down in the bottoms some where, it was fairly cheap and quick I will get the name for you.

Thanks, sent you a PM

I have plasma , but a torch works just as well :)


And a good sand blaster is on raytown rd. and around 57th?

Thanks Spune, I'm leaning towards having reward do it since he is much closer to my location.

[Guest]

If you want to bring it down I have a tractor to unload it and a big plasma and torch...we'll get them brackets off one way or another. I also have a sand blaster, but it can be pretty finiky.

[sangell]

I am in OP and can help you out.