LED lights

[mgerdes]

Hello Got another winter project today in the mail. Anyone ever install a set of flush mounted LED tail lights on there YJ? My biggest concern is the wiring. I got a instruction sheet but most of you know how vague they can be.

[valleyjeepsdude]

LED's on TJ's

I've installed these on my wifes TJ and if you have the correct plugs into the lights, installation is a breez.
Only three wires, running, turn/brake and ground....Anyone with a test light can handle this task...
Save the wire in the harness for a back up light...to be installed seperatly.
Mark Briscoe
Valley Jeeps
(816) 797-9194 or (816) 863-4286
mbriscoe@valleyjeeps.com

Happy 4 Wheeling

[DennisJayhawk]

Re: LED's on TJ's

I've installed these on my wifes TJ and if you have the correct plugs into the lights, installation is a breez.
Only three wires, running, turn/brake and ground....Anyone with a test light can handle this task...
Save the wire in the harness for a back up light...to be installed seperatly.
Mark Briscoe
Valley Jeeps
(816) 797-9194 or (816) 863-4286
mbriscoe@valleyjeeps.com

Happy 4 Wheeling

What did you do for a Liscense Plate light? I want to do this mod to my TJ too.

[mgerdes]

Re: LED's on TJ's

I've installed these on my wifes TJ and if you have the correct plugs into the lights, installation is a breez.
Only three wires, running, turn/brake and ground....Anyone with a test light can handle this task...
Save the wire in the harness for a back up light...to be installed seperatly.
Mark Briscoe
Valley Jeeps
(816) 797-9194 or (816) 863-4286
mbriscoe@valleyjeeps.com

Happy 4 Wheeling

What did you do for a Liscense Plate light? I want to do this mod to my TJ too.

I have not got to that point yet I do know that there are bolts for the liscense plate that have light in them that can be used.

[Y-Hike]

Here is good write up on the Led Instalation http://www.stu-offroad.com/cornerguard/led-1.htm

[mgerdes]

I got them in about Hour and a half work.

[mgerdes]

Re: LED's on TJ's

I've installed these on my wifes TJ and if you have the correct plugs into the lights, installation is a breez.
Only three wires, running, turn/brake and ground....Anyone with a test light can handle this task...
Save the wire in the harness for a back up light...to be installed seperatly.
Mark Briscoe
Valley Jeeps
(816) 797-9194 or (816) 863-4286
mbriscoe@valleyjeeps.com

Happy 4 Wheeling

What did you do for a Liscense Plate light? I want to do this mod to my TJ too.

Here is what I found for the liscense plate light.

http://www.cbrack.com/lite_n-boltz_photos.htm